Economical Series


  • Rigid steel structural tubing construction for 24/7 operation.
  • Self closing safety chucks.
  • Air expanding shafts using aluminum construction
  • Closed loop load cell or dancer tension control.
  • Pneumatic clutches to initiate tension.



Guide to Slitting Methods

Request a Quote



Economical  Rewind Stands and Winders

Economical Series clutch driven winder

Clutch driven rewind stand with closed loop load cell tension control designed to rewind woven Kevlar and polyester laminate. The winder included a photo electric edge guiding system.  Optional dancer tension control and open loop ultrasonic tension control available.

US Webcon offers a complete line of stand alone "Economical Series" Clutch Driven Rewind Stands using structural tubing construction to meet your production needs with numerous features and options to fit your specific requirements.  The shafted center driven rewind stand shown above is designed to rewind rolls of paper, film and non-woven materials directly from your process on a roll to roll basis.  The web tension is automatically and dynamically controlled by a closed loop load cell tension control system.  Load cell transducers with closed loop feed back measure web tension directly at the web.

The output of the controller maintains the correct torque required from an air clutch coupled through an AC motor using an AC drive changing tension dynamically as the product roll is wound up.  Self closing safety chucks hold the product rolls safely and firmly in position.  If the operator forgets to close the chucks they will close automatically when the product roll is turned over.


  • Shaftless designs available
  • Electro mechanical guiding with photo or ultrasonic sensors.
  • Driven unwinds for low tension applications.
  • Dancer or ultrasonic tension control.
  • Floor level roll unload to eliminate the need for hoists.

Related products:


US Webcon can modify the above design to meet your specific needs and requirements. Call us to discuss your application with one of our engineers at (570) 644-1401.



U.S. Webcon 138 Miles Road Paxinos, PA 17860 USA
Phone: (570) 644-1401 Fax: (570) 644-1404