Automatic Winders

shafted turret unwind stand with dancer tension control
The above shafted turret unwind was designed to unwind a plastic masking film used in processing aluminum plate at the mill. This unwind was designed to unwind web, splice and perform cut-off from the top of the roll so that the adhesive side of the film would be presented to the top of the sheet.

 

Products

 
 

Back  

Turret Unwind & Turret Winder Stands

US Webcon offers a complete line of Automatic Turret Unwind and Rewind stands to meet your production needs with numerous features and options to fit your specific requirements.

Tapeless Transfer Automatic Turret WinderTapeless Transfer Automatic Turret Winder

Turret winder is designed for automatic continuous center winding of small or large rolls using a tapeless transfer enveloper. A cross cut knife makes a no fold back transfer.

Tapeless Transfer Automatic Turret WinderZSTW – Cantilevered Zero Speed Turret Winder with Tapeless Transfer

Zero Speed Tapeless Transfer Turret Winder is designed along with the use of an Accumulator for automatic continuous center winding of small or large rolls using a tapeless transfer enveloper. A cross cut knife makes a no fold back transfer.

Tapeless Transfer Automatic Turret WinderZSTW – Zero Speed Turret Winder for Plastic Sheet Lines using Taped Transfer

Zero Speed Taped Transfer Turret Winder for plastic extrusion sheet lines are designed along with the use of an Accumulator for automatic continuous center winding of small or large rolls using a zero speed transfer enveloper using tape to attach the web to the core. A cross cut knife makes a no fold back transfer.

Shaftless Turret RewindShaftless Turret Rewind

The shaftless turret winder stand detailed on the following linked page is designed for automatic continuous center winding of paper, films, textiles, nonwovens and nonstandard web. The shaftless design minimizes operator injury and fatigue by eliminating the winding shaft.

Shaftless Turret UnwindShaftless Turret Unwind

The shaftless turret unwind stand detailed on the following linked page is designed for automatic continuous center unwinding of paper, films, textiles, nonwovens and nonstandard web. The shaftless design minimizes operator injury and fatigue by eliminating the winding shaft.

Shafted Turret Winder StandShafted Turret Winder Stand

The shafted turret unwind stand detailed on the following linked page is designed for automatic continuous center winding of paper, films, textiles, nonwovens and other nonstandard webs. The shafted design is the industry workhorse and an economical alternative that performs tirelessly.

Shafted Turret Unwind StandShafted Turret Unwind Stand

The shafted turret unwind stand detailed on the following linked page is designed for automatic continuous center unwinding of paper, films, textiles, nonwovens and nonstandard web. The shafted design is the industry workhorse and an economical alternative that performs tirelessly.

 

Economical Turret Unwind StandEconomical Turret Unwind Stand

 

Narrow Web Turret WindersNarrow Web Turret Winders

The cantilevered shafted turret unwind stand detailed on the following linked page is designed for automatic continuous center unwinding of paper, films, textiles, nonwovens and nonstandard web through the use of a festoon accumulator.

Automatic Turret Log WinderAutomatic Turret Log Winder

The Automatic Turret Log Winder detailed on the following linked page was designed to continuously wind small rolls of moisture barrier, roofing membrane, coated fabrics and similar web materials inline with the laminator. The winder will load it's own cores, apply adhesive to the cores, wind continuously and unload the turret onto a waiting conveyor hands off.

Other Automatic Winders

Automatic Surface WinderAutomatic Surface Winder

The Automatic Surface Winder detailed on the following linked page was designed to continuously wind rolls of nonwovens, paper, textiles, coated fabrics and similar web materials inline. The LDW model Automatic Surface Winder shown allows for winding of large diameter rolls because the roll is surface wound but center supported. Complete control of package density can be achieved through variable pressure at the winding bedroll nip point.

Back  

 

U.S. Webcon 138 Miles Road Paxinos, PA 17860 USA
Phone: (570) 644-1401 Fax: (570) 644-1404
e-mail: customerservice@uswebcon.com