Splice Boards


  • Rigid steel structural tubing construction for 24/7 operation
  • Manual pneumatic clamp operation
  • Razor knife guide
  • Precision aluminum idlers



Guide to Slitting Methods

Request a Quote



Manual Splice Board and Table

Manual Narrow Web Splice Board

This splice board shown above was placed on a narrow web unwind stand to splice in polyester film on RFID tag fabricating line.

US Webcon offers a line of manual web splice boards and automatic splicing equipment to meet your production needs with numerous features and options to fit your specific requirements. The US Webcon splice board is designed to make butt splices on unwind and rewind equipment. The web substrates are held using a set of pneumatically actuated clamps. A hand held razor knife is drawn down a blade guide cutting the new web and the web from the espired roll. A piece of tape is then used to hold the two webs together. This unit is available as an option to place on US Webcon equipment or as a stand alone mounted on a freestanding framework.


  • Vacuum table hold down
  • Solenoid valve operation using selector switches
  • Pneumatic operated cross cut

Related products:


US Webcon can modify the above design to meet your specific needs and requirements. Call us to discuss your application with one of our engineers at (570) 644-1401.



U.S. Webcon 138 Miles Road Paxinos, PA 17860 USA
Phone: (570) 644-1401 Fax: (570) 644-1404
e-mail: customerservice@uswebcon.com